FNIRSI DPOS350P 4-in-1 350MHz Digital Oscilloscope 2 Channel, 1 GSa/s
Más de 50 compradas el mes pasado
US$279.99
Precio en USD + envío por peso real. Llega en 5 a 10 días hábiles con Envi Express. Pagá en línea con tarjeta.
Más de 50 compradas el mes pasado
US$279.99
Precio en USD + envío por peso real. Llega en 5 a 10 días hábiles con Envi Express. Pagá en línea con tarjeta.
Scope*1, 350MHz Probe*2, Alligator Clip*1, QC18W Fast Charger*1, Storage Bag*1
4,1
125 calificaciones
Las calificaciones provienen de Amazon.com.
hvanesce
26 de septiembre de 2025
Excellent value
Amazing performance and functionality for a scope sold at this price.Using this scope for very-high-CMRR (floating) measurements at audio frequencies.Triggering and range of horizontal positioning are sufficient for 1-percent-accuracy peak and crest measurements of 1 V audio signals floating on a 250 V audio base signal (this customer placed the scope, leads and floating audio device into a transparent plastic container of dielectric strength much greater than 250 V).1% accuracy in 250x common mode achieved by calibrating at the intended operating point, i.e. repeatability in this configuration is better than 1% in 250x common mode.Reminder: any measurements that float the scope and leads over 40 V REQUIRE the scope AND leads to be completely enclosed in (for example) a transparent acrylic container (or other material with dielectric strength much higher than the floating voltage).Controls are easy to use; user-interface is intuitive, screen menus are well-designed and a wide variety of measurements and configurations are available.Planning to use this scope (inside of acrylic containers) for floating measurements, and for portable measurements. Probably not a replacement for a $1000 lab-bench-only DSO scope; but an incomparable value for portable and (inside of acrylic container) floating measurements.
Kindle Customer
7 de diciembre de 2025
Great scope
I watched a lot of reviews before choosing this scope. It works great for small electronics projects and automotive diagnostics. It is lite and easy to carry. The display is easy to see in daylight and the touchscreen is responsive. Great tool at a good price.
Professor
Decent value but flaws that are easy to avoid.
I'm an electrical engineering professor and have worked with scopes from $100 to $100k. This is an amazing device with a lot of bang for the buck, but a lot seems to be copied from Tektronix ("DPO" or color-graded, I think they have a patent). But overall great for students and folks on a budget. I don't like debugging designs for such vendors, but the BIG gotcha is that the "USB" adapter for this is 12V, so if you or your family plugs a normal 5V USB device into it - POOF! Maybe even fire. The wattage is reasonable for a 5V adapter, but they chose to use 12V for unknown reasons. You can see it with one of the same company's very nice USB analyzers.So... Why is this bad?Because you cannot power and USB-connect to transfer files at the same time. That means you have to run ONLY on battery or their 12V adapter when capturing data, then switch to USB to download. If they had used 5V, 3A USB-C, you could have connected it to your computer and used it all day long (or to a powered hub, because it does need 3A at 5V), as a peripheral, powering and capturing data all day long. They could also have put a separate USB port on it for such a connection, where you used their funky 12V adapter. But no.Spectrum analyzer mode is strange, with no obvious way to change vertical range nor units. Most digital scopes have "FFT," which this does, but again very limited ability to change ranges/settings.This stuff (except for AC adapter choice) is just code. There are plenty of good scopes out there to study for ideas... :)So... Great value, yes. Quirky and sub-optimal at same price-point? Yes.REVISED10/25/25 Added One StarStill don't like the power approach (can't run continuously on external power and connect to computer), but I was very surprised at how good this scope is as an X-Y monitor. Really good.
Yelena K.
Nice looking unit, can be used for showing off, but not professionally
I wish I can rate it better, I was hoping for it at least.I had few cheaper Fnirsi oscilloscopes and they were compact and had enough features, but lack on accuracy/usability.I got this unit hoping to use that somewhat professionally.Pros:Unit looks solid, quality is adequateCons:1. Unit has weird UI, very hard to set the triggers, scanning frequency and so on2. It keep resetting to a default Configuration after you power it off-on3. The BNC connectors are a joke. One of my connectors broke off after I simply leaned the device against the desk with the probes attached. After taking it apart it was the barrel shield not fully sealed to the metal frame of the connector on PCB. The barrel part was simply pushed into the metal frame without any soldering/welding. And easily snaps off, breaking the central pin.4. Extremely noisy. The fan works all the time at full speed even if the unit is not heavily used.5. Cannot use any USBC with PD, have to use the supplied PSU6. Cannot use power supply at the time of measurements. Only turns on when PSU is disconnected.7. Battery life is short. If you want to use measurement all day long, will have to sacrifice at least 1/2 time for charging.8. Most important ! The measurements are all over the place. Sometimes it "see" the noise, you wiggle the probes or connector and signal comes back, or you change the settings, the signal is back or shows signal at lower/higher amplitude/frequency. Tried to use the device for low frequency/high frequency signals from 0.1V..20V and saw the same behavior. Unreliable, wrong and glitchy data on screen 90% of the time. I tried probes from more expensive desktop osci and got the same behavior.