Works great! When it does.
So far it works almost perfect when it works. I want to start this review by adding a quick note that I may have received a printer that was either mismanufactured or had some quality control issues. That being said, things were good until they weren't.Shipping and delivery are the item was as promised by prime. Unboxing and setting up the printer possibly took about 30 minutes total. It seems like the unboxing took a little longer due to the packaging being excellent. Putting a pieces together. Possibly took about 10 minutes at most. Once set up the device did itself. Seem to handle that very well and with very little noise and now enclosure. The touch screen seems a bit finicky and requires Force rather than tap. I would say that this may be the weakest link on the device, but it's definitely better than a bamboo version of the screen. I was able to crank out several dozen prints with about 90% accuracy and completion as with any other 3D printer learning, the nuances of the software can be a little frustrating. However, if you're used to playing with orca slicer or any other slicer, you eventually get your attached within a couple hours. I was able to build an enclosure without issues and install the camera as well. I would say that the cable from the camera to the touch screen appears to be a bit short.I get to the part where things just stopped working.The printer had been properly hustling for about 300 hours when at the commencement of a new print with auto leveling set. It was a large print, the nozzle and extruder system hit the leveling bed which caused some major catastrophic damage. The device allowed the nozzle and print bed to etch on each other and eventually fuse. The print bed has gold flaking material which eventually ended on all the components of the printer, including the belt drives and the the extruder system. The odd part about it is that the printer never stopped attempting to print during this process. I just happened to notice a noise level that was not consistent with the previous 290 hours of printing. The only thing that would stop it was unplugging the device. Since then I've been in contact with flashforge support which has been a dream to work with. I have a tech background so I was able to take the printer apart. Clean off all the gold flakings and metal flakings from all the components using air and vacuum. Flashforge decided to send me a new print nozzle, a new bed plate and a new extruder kit to resolve this issue. Luckily this is not my first printer and it won't me my last one either. Based on the customer support that I received.What do I like about this printer? I would say that the speed noise and accuracy are unmatched compared to bamboo or any cubic which I have filament change speed seems to be quicker with flashforge using flashforge filament seems to be the best medium to use. I've had some issues with the sunlu petg filaments for some reason, even customizing the profiles to the recommended sunlu specs seem to get a lot of scarring and inconsistent lines on prints.I will be updating my review once I install the replacement parts over the next couple weeks.Update 7/7/26Overall great machine. Going on over 3k hours of print and a few nozzle changes. I have replaced the entire hotend due to a filament issue (bad batch was more glue than filament). Upgrading to 5 stars due to support and being a machine with less issues than my anycubics or bambu.
Great Printer for Beginners and Multi Color Printing
I picked up the AD5X as my second printer after using an FLSun Super Racer, and the overall quality of life jump was noticeable right away. Unboxing and assembly were simple, and I had it printing in under thirty minutes.Setup and FeaturesThe automatic bed leveling is one of the best parts of this machine. I run it before every print since it takes only a minute and keeps everything consistent. The included PEI plate has been excellent. I clean it with alcohol and have had strong adhesion without needing glue.Filament and PrintingFilament changes have been smooth. I mainly use SunLu PLA Plus and have had no clogs or grinding. Default profiles in Orca Slicer have given me great results, from fast small prints to large models that fill most of the plate. The touch screen UI works fine, although I mostly watch the live data through Orca.Multi Color Use and NoiseNoise levels do rise during multi color printing because of the constant swapping and purging, but an enclosure helps a lot. Purge waste is something to expect, although it can be saved and reused in silicone molds for small parts.Build Area and ResultsThe build volume is large enough for masks and modest helmet pieces when angled correctly. Bed adhesion has been reliable as long as the surrounding temperature stays stable.ReliabilityI am close to one hundred hours of printing on this machine. Any issues I have had were user error. The included tools are the standard set you would expect, nothing fancy but perfectly usable.Who This Is Good ForThis is a great printer for anyone starting out, or for someone ready to step into multi color prints without spending a lot. It has been reliable, easy to use, and solid for both small and large projects.Update: it takes some work with a Slicer but it is possible to get a full size helmet out of the printer. Masks are typically no issue but I had to split a full size into about 6 parts. It was a fun learning experience but it shows how versatile it can be with built plate limitations to work around.
This machine has promise, but its janky. Very janky. (nevermind, its dead now.)
Edit, 2 weeks in: Printer keeps jamming at the 4in1 connector, even though the machine cuts and then retracts. Following the video from Flashforge just causes it to break. Even their support agent in the video has a hard time pulling these without deforming the tube._____First off, nice that it comes 95% assembled. If you have problems with putting it together, either its broke, or you should return it and take up building with play-doh. The only reason it took 20 minutes to setup was because of the horrible screen interface, the left hand of the screen is unresponsive, so I have to slide my finger around to get anything to happen.I ran the initial calibrations, and sent my own test print using default profiles from Orca. Torture test if you will. Was running great until one of the rewinders allowed filament to get behind the bracket. Unlike any other multi-color unit, it just printed air for that color for several layers. I think some longer ptfe tubes with a bracket to keep them towards the center of the spool would help. But I'm not about to design a fix for an out of the box issue. There is also no way to use this with my polymaker dry boxes like the other machines, so if you live anywhere where there is humidity, good luck.The switcher on this looks like a rip-off of the Prusa MMU, but without the things that make the MMU work right, like filament position detection. Looks like Joseph Prusa was right about Creality-et all ripping off their design.First layer quality was all over out of the box, some objects had a decent 1st layer, others had gaps, like there was a huge warp in the bed (which it looks relatively flat under a straightedge) . Speaking of the bed, its thin plastic, so Z moves are LOUD. Might benefit from a strip or 2 of dynamat. That might be the bed slamming into the limits, who knows with these.I'm waiting on reply from Flashforge to see what can be done about the 2 issues, before we box it up and punt it back to Amazon like we would with any other bad Chinese tools we find on here. This was just ordered to fill a gap in our equipment while the Mk3S is being upgraded, and I refuse to spend my time correcting bad machine design.Amazon refuses to refund the printer cost despite having it for 2 weeks.
Great value!!
Fantastic 3D printer! It was easy to physically set up. It took a few minutes to get the software updated. But after that it is awesome! It’s been running almost non stop since we set it up. Make sure you buy additional filament because it only includes a small amount of a couple colors. Overall it is a great value! Im already considering buying a second one! 10/10 would definitely recommend if you want a 3D printer and don’t want to drop $$$$$ on one!