Especificaciones
- Mounting Type
- Tabletop Mount
- Movement Type
- Articulating, Rotate, Swivel, Tilt
- Material
- Alloy Steel
- Color
- Black
- Maximum Tilt Angle
- 85 degrees
- Unit Count
- 1 Count
- Number of Packs
- 1
- Enclosure Material
- Alloy Steel
- Maximum-Supported Screen Size
- 32 inches
- Minimum-Supported Screen Size
- 17 inches
- Fabricante
- HUANUO
- Model Number
- HNSS8
- Mfr Part Number
- HNSS8
Ver todas las especificacionesVer menos⌄
Calificaciones
4,6
★★★★★7.108 calificaciones
Las calificaciones provienen de Amazon.com.
Absolutely no regrets!
Totally awesome! TLDR : An awesome mount at a great price!SCEPTRE e225w monitor owners please read further.Installation 4/5: Pretty darn easy. You may want a 2nd person just for help holding thing because it is a wee bit awkward at times but I did it on my own and things turned out just fine! Make sure to adjust the tightness of the arm once your monitor is already mounted and keep your arms near it while testing just in case.Compatibility: 4.8/5: there are 2 mounting methods for desk and monitor. My desk is about 1 cm thick and it is able to clamp down and hold tight. The monitor mounting system also includes 2 sets of screws. One for normal mounting and one longer set to be paired with spacers for round back monitors. It fit perfectly with my fiences monitor ( onn brand) !!!ATTENTION SCEPTRE E225W OWNERS!!!! this is the monitor I have and if you want to successfully and safely mount this monitor you will need to use the mounting spacers included with your monitor when you purchased it( they look like motherboard standoffs) If you , like me , lost these simply contact scepter customer support or tech support. It's super easy and they will send you a new set free of charge.Accuracy 5/5: This is exactly as it was described and I have absolutely 0 complaints!Movement 4/5: Once you adjust the tightness it is fairly easy to move around. Some combinations of directions are more dificult than others but this will happen with every mount of this type it's just impossible to get around. The most dificult movement is raising or lowering the entire arm up or down the pole. I would not recommend this mound if you are wanting to do this specific motion multiple times per hour. However all the other ranges of motion are absolutely awesome!
RRoland
5 de febrero de 2026
Good quality and price
Easy to assemble and works well. Well built and sturdy.
SSly Green
11 de noviembre de 2025
Solid and stable when tensioned properly.
I bought 2 of these one in feburary of 2024 and one in august. Both are still stable and snug, even through earthquakes. I bought the Dual arm, but found that It was easier to just use it as a single. Once you adjust the tension properly the monitors sit right where they need to. Some shoddiness on the plastic pieces on the clamp as the cable managment just pops off if you bump it wrong, but otherwise a solid product.I am using the clamp mounts. Setup was quick and painless.I am using them on a 27" and a 19" monitor. The dual mount is on my 32" samsung which is lighter than the 27".None of the arms have slipped or bounced out of where I put them and all of them move and rotate if i need them to. Would buy again. Would recommend to others.
Easy to assemble and install
This is my first monitor arm purchase. All the parts of this arm work very well together. Easy to clamp it to my table. I'm using it with an ASUS Proart 27" monitor. I like the monitor to sit low near the table surface, and this arm works for that. Adjusting the monitor position is smooth.The package includes multiple Allen wrenches, screws, washers, and other things. Cable management was a breeze for me, and not an issue. I laid the cables on the arm, but there are cable management routes and clips on the arm (see the picture).Keep in mind, when you look up the weight of your own monitor. The first weight you see might be the monitor and stand together. Find the weight of the monitor alone. It will be lower. My Proart 27" monitor is heavy because of the features like USB hub, but it's still only 10.65 lbs, which is well below the max weight for this arm.