Especificaciones
- Mounting Type
- Wall Mount
- Movement Type
- Articulating,Swivel,Tilt, Swivel
- Material
- Alloy Steel
- Color
- Black
- Maximum Tilt Angle
- 15 degrees
- Unit Count
- 1 Count
- Fabricante
- X-MOUNT LIMITED
- Peso
- 11.9 pounds
- Model Number
- XML008-1K-01
- Mfr Part Number
- XML008-1K-01
- Enclosure Material
- Alloy Steel
- Maximum-Supported Screen Size
- 84 inches
- Minimum-Supported Screen Size
- 42 inches
Ver todas las especificacionesVer menos⌄
Calificaciones
4,7
★★★★★50.438 calificaciones
Las calificaciones provienen de Amazon.com.
TTee Scaly
24 de julio de 2026
Easy to install, holds the viewing angle, range of motion is great. Don't overpay Buy this one
This mount was easier to install and holds my 65" TV better than a high end mount I paid 3x for. The only negative I had was that none of the supplied bolts for attaching the mounting arms to the back of my TV. They did have a customer service card with contact info that specifically said to contact if bolts were needed. I just happened to have some from the other bracket left over so I had some to use. The range of motion is great, the viewing angle stays right where I want it unlike the bracket I paid much more for. This TV is heavier than the other TV I mounted so this mount totally outdoes my other mount. The other mount every few days I have to adjust the viewing angle because it drops.
Rrusty shackleford
16 de agosto de 2026
Very Strong
Worked perfect for my 65" TV. It managed to handle me hanging from it and I'm 2 bills and some change. Easy to assemble and install. Would buy again!
Bboicecrane
7 de agosto de 2026
Great deal
Very easy to mount and also very sturdy. It has a full range of motion that can accommodate any tv position possible.I used this to mount an older Samsung 55 inch tv. Im guessing it might be 6 or 7 years old by now.I received the mount, unpacked it and went over the instructions. I purposely didnt get in a hurry and one afternoon I decided to get started.Instructions were fairly clear, I did have to go to the hardware store for 4 longer screws to attach the tv to the bracket.But it wasn't a big deal. I would definitely purchase this again if I needed another TV mount
VVine & Dandy
7 de junio de 2024
Go for the the USX mount, perfect!
I have to say, this was one of the most well-thought-out products I've ever purchased. The item arrived well packaged in a sturdy box (inside another Amazon box) with everything well laid out inside. All of the fasteners were individually packaged so there's no fishing around for the right part. For the record, I used this to mount a 65" TV that weighs about 50 lbs. It is definitely sturdy and can hold much more.Additional tools you will need: Tape measure, stud-finder, drill w/drill and screwdriver bits, wrench & socket set (SAE).Mounting on the wall was a breeze. My advice to other buyers that you will need to locate the wall studs accurately and you will need drill the pilot holes as close to the center of the studs as possible - particularly if you're mounting a heavy TV. There's just no getting around that. Use the "stud-finder" to mark the edges of the studs, then use those marks to determine the mid-point. Make a couple of passes to be absolutely sure. Included in the package is a peal-and-stick cardboard template and two bubble levels. Don't bother with the one that you're supposed to stick on the template, just use the big plastic one. You're going to want to do some measuring here to make sure you place the mount exactly where you want it. I was lucky that the center of the TV was almost dead-center between two studs. You'll also want to measure the height of the mount by test-fitting the part that goes on the TV and doing a little figuring on how much to move the mount up or down so that the TV is where you want it.Once you've drilled the holes, screw the bracket to the wall and use a wrench to snug the screws tight. Don't over-tighten or you'll strip out the holes. Make sure you put the mount right side up (Yes, I made this mistake). Next, attach the brackets to the TV. The kit comes with an assortment of screws, washers and bushings to accommodate any TV. Each TV is different and you're just going to have to use common sense. Don't over-tighten these screws either, but the brackets need to be snug.Before hanging the TV on the wall mount, ensure that the side-to-side and front-to-back tilt adjustment screws are tight and relatively level. You can adjust them later to get them perfect, but you should have them close to where they need to be now and tightened down so the mount doesn't move when you're trying to hang the TV on it. Have someone help you lift the TV onto the wall mount. It just hangs on there (at first), but it's much easier if you have someone to help guide it into place. Attach the locking brackets to the bottom of the TV brackets and you're done!!!Operation of the mount is very smooth, though it takes just a little bit more effort than I'd like. I attribute that to the fact that it's brand new and I'm certain a few drops of oil strategically placed will resolve that. BY NO MEANS would I suggest getting a different mount based on that purely-subjective opinion. This mount is perfect for a big TV. It's a little pricier than most, but worth every penny.Read less